If you like the option of a single charger for 6 & 12 Volt batteries, AccuMate 6V / 12V is for you. Select the voltage, hook it up to the battery & this reliable, temp’ compensated, 4-stage charger will do the rest. The 4-stage program is ideal for starter & deep cycle / stand-by batteries where a 100% full charge is required for maximum delivery.
FULLY AUTOMATIC SMART CHARGER – hook it up and walk away. AccuMate 6v /12v will fully recharge your battery and then maintain it safely.
1,2A CHARGE CURRENT – delivered constantly right up to the final stage to ensure the quickest charge.
LONG TERM STORAGE – hook it up and AccuMate 612 will maintain your battery at the correct voltage to prevent sulfation for as long as you need to store the vehicle.
BATTERY SIZE: 4Ah to 75Ah
FOR ALL 6V & 12V LEAD-ACID BATTERIES – such as flooded / filler cap; sealed; AGM (absorbed glass mat); GEL.
Integral electronic protections against short circuits at the clamps and wrong polarity connections. Spark suppression system. No fuses to burn.
Ensures best battery power and life with it’s 4 stage charging method and provides Safe long term battery care Delivers charge at a safe voltage when the battery needs it, never overcharging Inter-active stand by charging when the battery has been used or needs charge.
1,2A charge current delivered constantly right up to the final stage to ensure the quickest charge.
100% automatic 100% safe
Fully automatic smart charger-maintainer for indoor use. No output when not connected to the battery. Short circuit, over current and reverse polarity protection.
Included accessories
Weatherproof Permanent Connector (TM-71)
Alligator / Battery Clips(TM-74)
Temperature compensated & protected charger
IUoU 3-step charging with reversion from MAINTENANCE float stage if high current is drawn during storage charging.
Simply select your relevant voltage, hook up the battery and this reliable temperature compensated, 4 stage charger will do the rest.
Integral electronic protections against short circuits at the clamps and wrong polarity connections. Spark suppression system. No fuses to burn.
Suitable for all types of lead/acid batteries: filler cap types; absorbed acid “MF” (AGM); valve regulated (VRLA); & flooded (wet) & GEL-electrolyte types from 17Ah upwards (9Ah upwards for 24V).
Very easy to use – Select 12V or 24V charging output according to battery type, then connect to battery and mains power. The rest is fully automatic.
In addition to its quick charging ability, AccuMate PRO is ideal for long term maintenance of the batteries of irregularly or seasonally used vehicles & appliances, classic, veteran & collectors` vehicles.
Interactive standby feature – operational during MAINTAIN stage – acts as a power supply and battery protector. It will allow close to maximum current to be drawn by circuits or devices connected to the battery (vehicle alarms, trackers, ventilation fans, in-vehicle freezers) without the battery losing any charge.
No risk of overcharging – AccuMate PRO’s special temperature regulated monitoring circuits vary & regulate the current & voltage according to ambient temperature as long as the batteries remain connected. One month or one year, it makes no difference!
Easily detachable handle incorporates cable and clamp storage and can be mounted above the main housing (for carrying) or below (for wall-mounting). 2 keyhole slots in the rear of the housing engage on two screws in the wall.
Compact charger dimensions of 14 x 16 x 15 cm (5½” x 6 3/8″ x 6″high) including handle.
Integral cooling fan with sealed ball-bearings (rated for a minimum 5 years of continuous running) ensures cool operation for enhanced service life. An internal temperature monitor (NTC thermistor) controls the output current & reduces it if necessary to avoid overheating in exceptional circumstances.
Intelligent electronic protections against inverse polarity, short-circuit, over-heating with built in spark suppression.
Additional fused protection provided by: fused eyelet connection lead (protects battery against dead-shorting across terminals in case of accident); AC input fuse; accidental disablement of the built-in cooling fan; and a thermal fuse protects the transformer.
Delivered with wall / carry bracket; mains lead; 2 detachable connection sets: one with battery clips, the other with eyelets for permanent attachment to the battery terminals, complete with an inline fuse.
What does the Quad program mean on the OptiMate 4?
OptiMate 4 Quad Program includes four charging programs; the standard program for lead-acid batteries is supposed to be used when connecting directly to the battery, the CANbus (BMW) program for lead-acid batteries allows charging and maintaining via the DIN socket on BMW Motorcycles (models 2004 and later).
The standard program for lithium batteries is supposed to be used when connecting directly to the battery, the CANbus (BMW) program for lithium batteries allows charging and maintaining via the DIN socket on BMW Motorcycles (models 2004 and later).
Does OptiMate 4 have a battery recovery program?
Yes, the standard program has the most advanced recovery program which saves ‘dead flat’ sulphated batteries from as low as 0,5V.
Which program do I need to select to charge over the 12V socket on my BMW? You’ll need to select Program 2 (Pb-CAN-bus) or Program 4 (LFP-CAN-bus) depending on the type of battery in your BMW motorcycle. Program 2 is for a 12V sealed lead-acid battery – your sealed battery may be marked 12V VRLA, GEL or AGM. Program 4 is for a 12.8V LFP (Li-Ion with chemistry LiFePO4) battery.
How do I select the correct program? Disconnect the OptiMate 4 from the battery or vehicle. Push and release the pushbutton switch. The mode selection changes when the button is released. Continue to press and release until the desired program has been selected. If no futher selection is made for at least 3 seconds SAVE (#3), CHARGE (#4), OPTIMIZE(#5) and TEST (#6,7, 8) LEDs flash twice to confirm selection is in memory.
What’s the difference between the OptiMate 4 Quad Program and the OptiMate 4 Quad Program Premium edition? The standard edition is delivered with a set of battery clips (O-04), a permanent battery lead (O-01) and a handlebar hanging hook to suspend the charger from the handlebar. The Premium edition includes all the same accessories PLUS a SAE to DIN adapter (O-19) to connect directly to 12V DIN sockets on BMW and Triumph motorcycles.
I want to use my OptiMate QUAD over the 12v socket. Which additional connector do I need?
You will need one of the OptiMate BIKE plug cables (O-02, O-09, O19 or O-29)
Can I charge my Triumph motorcycle through the 12V DIN socket?
Yes, IF the socket is ‘live’ (hot) when the motorcycle ignition is turned off. (TIP: Recent model Triumph Tiger 850/900 and 1200/1250 have a live socket near the instrument panel.). Select program 1 or 3 for direct-to-battery charging as the socket is directly connected to the battery.
What type and size batteries does OptiMate 4 Quad Program charge?
STD, AGM and GEL 12V lead-acid & 12.8V / 13.2V lithium LFP (LiFePO4) batteries used for engine start & deep cycle applications. For lead-acid batteries from 4Ah to 60Ah for 24-7 battery maintenance and for lithium batteries from 2Ah to 15Ah for 24-7 battery maintenance.
How fast does OptiMate 4 recharge batteries?
Charge time on a flat but otherwise undamaged battery: a 12Ah battery should take no more than about 12 hours to progress to the self-discharge check. Deep-discharged batteries may take significantly longer, a full charge may not be achieved within the hour charge safety limit. In this case.
How to charge and maintain your BMW motorcycle battery?
Charger series
Volts
12v
Reviews
There are no reviews yet.
Be the first to review “Accumate 6v / 12v” Cancel reply
Description OptiMate 2 DUO is the ‘ALL IN ONE’ general purpose battery charger and maintainer that assures batteries are always ready to perform. automatically adapts…
OptiMate 1 DUO, the ‘no brainer’ battery maintainer for the hi-technology battery in your performance power sport vehicle – Guarantees healthy lithium or lead-acid batteries! 4-step…
Description OptiMate Lithium 4s 0.8A is the essential battery charger for your off-road, moto-cross or race motorcycle – Ultimate protection for your high-performance Lithium battery.…
If you like the option of a single charger for 6 & 12 Volt batteries, AccuMate 6V / 12V is for you. Select the voltage, hook it up to the battery & this reliable, temp’ compensated, 4-stage charger will do the rest. The 4-stage program is ideal for starter & deep cycle / stand-by batteries where a 100% full charge is required for maximum delivery.
Reviews
There are no reviews yet.