DUCATI adapter: O47

Name: DUCATI adapter: O47
Brand: Optimate
SKU: O47
Availability: InStock

R589.00

DUCATI adapter, from SAE charger output to DUCATI connector

Converts the Ducati specific underseat battery charge connector (found on recent models) to an industry standard SAE 2-pole connector.

Length=30cm
Ducati >2010 connector,
Industry standard 2-pin SAE connector
15A fuse
Cable max. rating: 5 Amp
-40°C very low temperature use; cable remains flexible at ‘below freezing’ temperatures.

SKU: O47 Category: Cables Brand: Optimate

IDEAL FOR: AGM, GEL & STD 12V batteries from 4 – 60Ah & Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 15Ah

CHARGING AMPS: 1.25A (constant current)

CHARGING VOLTS: nominal: 12V & 12.8V range: 0.5V – 14.4V

OPERATION: Selectable, 4 charge programs.

12V: 1) Smart desulphation: 0.5V – 14.4V 2) BMW CAN-bus compatible: 5V – 14.4V
12.8V: 3) Low Volt Recovery: 0.5V – 14.4V 4) BMW CAN-bus compatible: 8.8V – 14.4V

STEPS: 9

FEATURES: OptiMate 4 Quad Program tests before & after charging and can recover a ‘dead-flat’ lead-acid & lithium (LiFePO4) battery from as low as 0.5 Volts.

USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C).

INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).

STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.

SAVE : Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode).

SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

INCLUDED: weatherproof battery lead, battery clip set & hanging hook.

WARRANTY: 3-year limited replacement warranty.

What does the Quad program mean on the OptiMate 4?
OptiMate 4 Quad Program includes four charging programs; the standard program for lead-acid batteries is supposed to be used when connecting directly to the battery, the CANbus (BMW) program for lead-acid batteries allows charging and maintaining via the DIN socket on BMW Motorcycles (models 2004 and later).

The standard program for lithium batteries is supposed to be used when connecting directly to the battery, the CANbus (BMW) program for lithium batteries allows charging and maintaining via the DIN socket on BMW Motorcycles (models 2004 and later).

Does OptiMate 4 have a battery recovery program?
Yes, the standard program has the most advanced recovery program which saves ‘dead flat’ sulphated batteries from as low as 0,5V.

Which program do I need to select to charge over the 12V socket on my BMW?
You’ll need to select Program 2 (Pb-CAN-bus) or Program 4 (LFP-CAN-bus) depending on the type of battery in your BMW motorcycle. Program 2 is for a 12V sealed lead-acid battery – your sealed battery may be marked 12V VRLA, GEL or AGM. Program 4 is for a 12.8V LFP (Li-Ion with chemistry LiFePO4) battery.

How do I select the correct program?
Disconnect the OptiMate 4 from the battery or vehicle. Push and release the pushbutton switch. The mode selection changes when the button is released. Continue to press and release until the desired program has been selected. If no futher selection is made for at least 3 seconds SAVE (#3), CHARGE (#4), OPTIMIZE(#5) and TEST (#6,7, 8) LEDs flash twice to confirm selection is in memory.

What’s the difference between the OptiMate 4 Quad Program and the OptiMate 4 Quad Program Premium edition?
The standard edition is delivered with a set of battery clips (O-04), a permanent battery lead (O-01) and a handlebar hanging hook to suspend the charger from the handlebar. The Premium edition includes all the same accessories PLUS a SAE to DIN adapter (O-19) to connect directly to 12V DIN sockets on BMW and Triumph motorcycles.

I want to use my OptiMate QUAD over the 12v socket. Which additional connector do I need?
You will need one of the OptiMate BIKE plug cables (O-02, O-09, O19 or O-29)

Can I charge my Triumph motorcycle through the 12V DIN socket?
Yes, IF the socket is ‘live’ (hot) when the motorcycle ignition is turned off. (TIP: Recent model Triumph Tiger 850/900 and 1200/1250 have a live socket near the instrument panel.). Select program 1 or 3 for direct-to-battery charging as the socket is directly connected to the battery.

What type and size batteries does OptiMate 4 Quad Program charge?
STD, AGM and GEL 12V lead-acid & 12.8V / 13.2V lithium LFP (LiFePO4) batteries used for engine start & deep cycle applications. For lead-acid batteries from 4Ah to 60Ah for 24-7 battery maintenance and for lithium batteries from 2Ah to 15Ah for 24-7 battery maintenance.

How fast does OptiMate 4 recharge batteries?
Charge time on a flat but otherwise undamaged battery: a 12Ah battery should take no more than about 12 hours to progress to the self-discharge check. Deep-discharged batteries may take significantly longer, a full charge may not be achieved within the hour charge safety limit. In this case.

How to charge and maintain your BMW motorcycle battery?